Equipment Hire - Photometers, Colorimeters & Spectroradiometers

T-10 Illuminance Photometer

CL-200 Illuminance Colorimeter

LS-100 Spot Luminance Meter

The Konica Minolta T-10 is a portable photometer that reports the illuminance in lux (lx) of light sources. Can also be used to measure luminous intensity in candelas. The T-10 has an NPL-traceable, UKAS accredited calibration.

» T-10 Specifications

The Konica Minolta CL-200 is a portable colorimeter that reports the illuminance in lux (lx) as well as the CIE chromaticity (xy, u'v') and correlated colour temperature (CCT, Kelvin) of light sources. Can also be used to measure luminous intensity in candelas. The CL-200 has an NPL traceable, UKAS accredited calibration for both illuminance and colour.

» CL-200 Specifications

The Konica Minolta LS-100 is a portable spot photometer that reports the "brightness" (luminance) of light sources or displays in candelas per square meter (cd/m2). The LS-100 has a minimum measurement spot size of 14.4mm diameter at a 1014mm working distance. The LS-100 has an NPL-traceable, UKAS accredited calibration.

» LS-100 Specifications

ProMetric Imaging (Video) Photometer

Brontes Illuminance Colorimeter

Specbos 1211 Spot Spectroradiometer

The ProMetric PM1423F-1 from Radiant Imaging is an imaging photometer / colorimeter based upon a high resolution CCD sensor with 1536 x 1024 pixels with a motorised filter wheel containing RGB filters precision matched to the CIE tristimulus observer functions.

ProMetric imaging photometers are used to measure the spatial (2D) luminance (cd/m2), illuminance (lux) and colour of displays and light sources. A variety of lenses is available to provide wide, medium and narrrow fields of view.

ProMetric photometers require a mains electrical supply and run under software control from a user-provided PC. On-site setup and operator training is available. The ProMetric photometer has a NIST-traceable calibration.

» ProMetric Specifications

The Brontes from Admesy is a high speed luminance colorimeter that can record up to 5,500 colour or 18,500 luminance measurements per second. The Brontes is a tristimulus colorimeter based upon three photodiodes with a spectral response matched to the CIE 1931 2° XYZ observer functions by means of precision interference filters.

Measurement parameters include luminance (cd/m2), flicker, XYZ tristimulus values, chromaticity (xy, u'v', L*a*b*), correlated colour temperature (Kelvin) and dominant wavelength (nm).

The Brontes requires a PC with USB interface. Software is supplied. The Brontes is powered over the USB connection.

» Brontes Specifications

The JETI Specbos 1211 is a miniaturised and fast broadband spectroradiometer covering the wavelength range from 350-1100nm. The Specbos 1211 can be used for measurements of spectral irradiance and spectral radiance, with measurement spot sizes from 4mm. A built-in red laser pointing device allows you to easily aim the Specbos at desired measurement spot.

The Specbos reports the spectral power of the light source and also the illumaince (lux), luminance (cd/m2), CIE chromaticity (xy, u'v'), correlated colour temperature (Kelvin), dominant wavelength and colour rendering (CRI, Ra).

The Specbos requires a PC with USB interface. Software is supplied. The Specbos is powered over the USB connection.

» Specbos Specifications