Manual Goniometer Stages

The GO series are manual stages that allow you to tilt an optical component over a limited range about a defined optical axis. The TP series are manual theta-phi goniometer stages for tilting an optical component about two axes.

» Request 3D PDF or 3D CAD Models.

GO 40 Goniometer

The GO 40 goniometer allows manual adjustment of ± 20° around an optical axis that is 20mm above the mounting surface. Adjustment is by means of a precision worm gear drive and adjustable dovetail guides. Unintended adjustment can be avoided by using a fixing screw. In order to integrate with the SYS 65 rail system, the adapter plate ADP 65B or slide RT 65-35-R should be used.

» Download Datasheet

GO 65S Goniometer

The GO 65S goniometer allows manual adjustment of ± 15° around an optical axis that is 32.5mm above the mounting surface. Adjustment is by means of a precision worm gear drive and adjustable dovetail guides. Unintended adjustment can be avoided by using a fixing screw. In order to integrate with the SYS 65 rail system, the adapter plate ADP 65B should be used.

» Download Datasheet

GO 65L Goniometer

The GO 65L goniometer allows manual adjustment of ± 20° around an optical axis that is 32.5mm above the mounting surface. When the GO 65L is mounted directly on an optical table, a beam height of 65mm is reached (the same as the SYS 65 rail system optical axis). The GO 65L and the GO 90 can form a TP 90 theta-phi goniometer with an optical height of 105mm.

» Download Datasheet

GO 90 Goniometer

The GO 90 goniometer allows manual adjustment of ± 15° around an optical axis that is 65mm above the mounting surface. Adjustment is by means of a precision worm gear drive and adjustable dovetail guides. Unintended adjustment can be avoided by using a fixing screw.

» Download Datasheet

TP 65 Theta-Phi Goniometer

The TP 65 theta-phi goniometer is based upon the GO 65S and GO 40 stages and allows manual adjustment of ± 15° and ± 20° about a centre of rotation that is 20mm above the mounting surface. Adjustment is by means of a precision worm gear drive and adjustable dovetail guides. In order to reach the system height of the SYS 65 rail system, the model 65 B adapter plate is required.

» Download Datasheet

TP 90 Theta-Phi Goniometer

The TP 90 theta-phi goniometer is based upon the GO 65L and GO 90 stages and allows manual adjustment of ± 20° and ± 15° about a centre of rotation that is 32.5mm above the mounting surface. Adjustment is by means of a precision worm gear drive and adjustable dovetail guides.

» Download Datasheet