WaveMaster Laser Wavelength Meter

Coherent WaveMaster Laser Wavelength Meter

Measures the wavelength of pulsed & CW lasers of any repetition rate

Coherent's WaveMaster™ measures the wavelength of both CW and pulsed lasers of any repetition rate. The wavelength can be displayed in GHz, wavenumbers or nanometers, with vacuum and air readings available. The WaveMaster will read the peak wavelength of sources with bandwidths of up to 2nm from 380 to 1095nm. Bandwidths wider than 2nm can be accommodated at the longer wavelengths.

»Download WaveMaster Datasheet

User-Friendly

The WaveMaster is easy to use - just turn on the readout and get the beam within 10 degrees of normal incidence to the 2m fibre optic sampling probe. No special triggering modes or setups are required for pulse capture.

Pulse or CW Operation

The WaveMaster can be operated in any of three modes: CW; CW with averaging; and pulsed. In CW mode, the display is updated at 3Hz. In CW with averaging, the display is updated at 3Hz with an average of the last 10 readings taken at 3 Hz. For pulse mode, when a valid pulse is received, the display will show the wavelength reading of the pulse for 15 seconds, or until another valid pulse is received.

Specifications

WaveMaster™	Specifications
Part Number	33-2650
Wavelength Range	380-1095nm
Accuracy	0.005nm
Resolution	0.001nm
Min. Pulse Repetition Rate	Single shot
Max. Pulse Repetition Rate	CW
Max. Signal Bandwidth	2nm @ 400nm 3nm @ 600nm 5nm @ 1000nm
Min. Signal	20µW CW @ 632nm 2mJ pulsed @ 1064nm
Max. Signal	100mW CW @ 632nm 100mJ pulsed @ 1064nm
Display Update	3Hz
Console Size (W x H x D)	259 x 105 x 352mm
Power Supply (Incl)	Input: 90-250VAC, 40-72Hz Output: 12V DC
Interface	RS232 (serial)